1-888-494-1450 info@geier-bluhm.com

Level Selector

Showing 118–124 of 124 results

  • 4-4037

    4-4037

    Drawing Available

    General purpose plate level using anodized aluminum case with black finish.
    Sensitivity: 90 seconds per division (.1″)
    Size: 4.00 inch x .75 inch x .62 inch height with two (2) mounting holes .266 inch diameter located 3.250 inch C to C

    Total: $87.62
  • 4-6010

    4-6010

    Drawing Available

    High precision mounted tubular level used on fine instruments and special machinery. The ground tubular vial has a sensitivity of 4 to 6 seconds per division (2 mm) equivalent to a rise of .0003 inches per foot. The brass case has an instrument black finish with special mounting lugs at each end. One (1) mounting hole is .375 inch diameter and the other elongated for adjustment purposes, located 5.812 inch C to C.
    Size: 6.37 inch x .81 inch diameter

    Total: $324.19
  • 4-6011

    4-6011

    Drawing Available

    High precision mounted tubular level used on fine instruments and special machinery. The ground tubular vial has a sensitivity of 8 to 10 seconds per division (2 mm) equivalent to a rise of .0005 inches per foot. The brass case has an instrument black finish with special mounting lugs at each end. One (1) mounting hole is .375 inch diameter and the other elongated for adjustment purposes, located 5.812 inch C to C.
    Size: 6.37 inch x .81 inch diameter

    For Inquiries email: info@geier-bluhm.com

     

    Total: $
  • 6-4000

    6-4000

    General purpose, high quality, Machinists’ level with a precision ground vial, 4.00 inch base, and rotating cover to protect the vial when not in use. Base features a groove running the entire length for use on a machine shaft or piping.
    Sensitivity: 240 seconds per division (2.0mm) or equal to a rise in elevation of .015 inch per foot

    Call for price and availability.

    Total: $284.65
  • 6-8000

    6-8000

    Machinists’ Level

    Certified High-quality Machinists’ level with a precision ground main vial, cross test level and an 8.00 inch base.

    • Sensitivity: 30 seconds per division (2.0mm) equal to a rise in elevation of .0014 inch per foot.
    • Rotating cover to protect the main vial when not on use.
    • Base features a cross test level and a groove running the entire length for use on a machine shaft or piping.
    • Each level is supplied with a Certificate of Calibration.
    • Call for price and availability.
    Total: $
  • J-2850

    J-2850

    Conic, or cupped, mounting spring is formed and heat treated, providing a compression-type adjustment when placed between the mounting surface and the bottom of the level housing. This type of design provides for a heavier, more rigid spring, and is used with the 2-24000 Circular Levels. Each spring has three (3), equally spaced, holes to accommodate mounting screws. Material: Beryllium Copper

    Total: $3.85
  • M-0502

    M-0502

    Drawing Available

    MOUNTING STUD & NUT SET
    Set of studs and nuts used with various mounted tubular levels to provide horizontal adjustment into the level position. Set includes two (2) threaded (3/16”- 48) studs, two (2) flat nuts and two (2) conic nuts. All component parts are unfinished brass, and are designed to be used with various mounted tubular levels.
    Material: Brass

    Total: $25.95